Daintree Certified Devices

Current’s growing ecosystem of hardware partners enable customers, contractors and designers to select best-in-class devices to meet their sensing and control needs. Browse what’s possible using the filters below.

Wired Device Compatibility

SEARCH
711 results
RESET
DONE
Filters
17 results
  • EuControls Line-Voltage Wireless Lighting Controller LCM-1C09-ZB

    EuControls Line-Voltage Wireless Lighting Controller

    Product Number:

    LCM-1C09-ZB

    This device by EuControls is a line voltage powered Zigbee device, and should be used in applications where zonal control is desired. This device is intended to be mounted remotely and control a group of fixtures. The module controls the LED driver directly via a 9A rated relay for on/off control and 0-10V dimming.

    Manufacturer:

    EuControls

    Specifications:

    Plenum Rated

    INPUTS:
    Voltage: 120/277VAC
    Wattage: 800W (max)

    OUTPUTS:
    Voltage: 120/277VAC
    Current: 9A (max)
    Dimming: 1-10V, 100mA (sink)
    Controllers: Lighting
  • EuControls Low-Voltage Wireless Lighting Controller LCM-LV-ZB

    EuControls Low-Voltage Wireless Lighting Controller

    Product Number:

    LCM-LV-ZB

    This device by EuControls is a low voltage Zigbee device, and should be used in applications where granular control is desired. However, the module can be used to control multiple fixtures if desired. It can be powered directly off a driver's 12V auxillary output, and can be installed on a fixture via a standard 1/2" knockout. This device provides fixture control through 0-10V dimming only, as thus requires a '0-to-off' fixture.

    Manufacturer:

    EuControls

    Specifications:

    Plenum Rated

    INPUTS:
    Voltage: 11-13VDC
    Current: 90mA

    OUTPUTS:
    Dimming: 0-10V, 50mA (sink)
    Controllers: Lighting
  • Inventronics Wireless 0-10V Dimming Converter CNV-ZIGB

    Inventronics Wireless 0-10V Dimming Converter

    Product Number:

    CNV-ZIGB

    This device by Inventronics is a low voltage Zigbee device, and should be used in applications where granular control is desired. However, the module can be used to control multiple fixtures if desired. It can be powered directly off a driver's 12V auxillary output, and can be installed on a fixture via a standard 1/2" knockout. This device provides fixture control through 0-10V dimming only, as thus requires a '0-to-off' fixture.

    Manufacturer:

    Inventronics

    Specifications:

    INPUTS:
    Voltage: 10-13VDC
    Current: 20mA

    OUTPUTS:
    Dimming: 0-10V, 20mA (sink)
    Controllers: Lighting