Daintree 3rd Party Interoperable Devices

Current’s growing ecosystem of hardware partners enable customers, contractors and designers to select best-in-class devices to meet their sensing and control needs. Browse what’s possible using the filters below.

Connecting 3rd Party Wired Devices

SEARCH
711 results
RESET
DONE
Filters
19 results
  • EasySense Fixture-mount Sensors

    EasySense Fixture-mount Sensors

    Product Number:

    SNS300

    EasySense SNS300 is a compact, fixture-mount network lighting control (NLC) solution. It integrates motion/daylight detection capability and uses Zigbee protocol (IEEE 802.15.4) to provide a cost-effective, network-based smart lighting solution for the commercial indoor application. Together with the Daintree Enterprise solution, EasySense SNS300 enables you to remotely adjust light settings, monitor and actively manage the energy usage.

    Manufacturer:

    Philips

    Specifications:

    INPUTS
    Voltage: 12-20V DC (through the two-wire low-voltage Xitanium SR digital interface)
    Current: 13mA

    OUTPUTS
    On/off, dimming, occupancy, daylight, and power metering
    Sensors: Occupancy, Energy
  • eu controls

    EuControls Wireless Lighting Controller On/Off 0(1) -10V Dimming

    Product Number:

    LCM-1C20-ZB

    EuControls LCM-1C20-ZB is a wireless lighting controller providing on/off and 0(1)-10V dimming capabilities for electronic ballasts and LED drivers that comply with IEC60929 Annex E2. As a Zigbee certified product, this wireless lighting controller can be easily integrated with the Daintree Network to increase energy savings and improve the life span of your LED lighting infrastructure. 

    Manufacturer:

    EuControls

    Specifications:
    • ZigBee Wireless Control of Luminaires
    • 2+20dBm ZigBee transmit power
    • ON/OFF and 0(1)-10V Analog Dimming Control, 100mA Sink
    • Compatible with Electronic Ballasts & LED Drivers that comply with IEC60929 Annex 
    • E2, 1-10V Dimming.
    • Sync current 100mA and 20A relay
    • ON/OFF AC switching up to 277Vac
    • Stores last dim setting even when powered off
    Controllers: Lighting
    Switches: Dimming, On/Off
  • Inventronics Wireless 0-10V Dimming Converter CNV-ZIGB

    Inventronics Wireless 0-10V Dimming Converter

    Product Number:

    CNV-ZIGB

    This device by Inventronics is a low voltage Zigbee device, and should be used in applications where granular control is desired. However, the module can be used to control multiple fixtures if desired. It can be powered directly off a driver's 12V auxillary output, and can be installed on a fixture via a standard 1/2" knockout. This device provides fixture control through 0-10V dimming only, as thus requires a '0-to-off' fixture.

    Manufacturer:

    Inventronics

    Specifications:

    INPUTS:
    Voltage: 10-13VDC
    Current: 20mA

    OUTPUTS:
    Dimming: 0-10V, 20mA (sink)
    Controllers: Lighting